OxyStrip Diffusers

  • Industry max. 8:1 Diffuser Turn Down
    • 2.5 SCFM to 22.0 SCFM range per 2m OxyStrip™
    • 4.0 Nm3/h to 36.0 Nm3/h range per 2m OxyStrip™
  • 20% to 40% more efficient - reduction of utility cost
  • Membrane materials & expected life
    • EPDM, Silicone, & Polyurethane
    • > 10 years
  • One 2m long OxyStrip™ is equal to 9 times 9” disc
  • Installation
    • Retrievable or fixed grid
    • Up to 90% Reduction of pipe & couplings
Oxy Strip

OxyLift Design

  • Retrievable rack
    • Multi-level system redundancy
    • One OxyLift diffuser rack = 162 9” disc diffusers
  • Diffuser rack retrieval in 2 minutes
    • Rack transfer system for diffuser maintenance
    • Movable hoist and transfer system
  • No retrievability limitation by basin geometry
    • Rectangular, round, toroidal, and square
    • Bridge or wall mounted
  • OxyProcess compatible design
oxy strip

Dual-Air-Control Design

  • One set of Dual-Air-Control – OxyStrip diffusers equals eighteen 9” disc diffusers
  • Up to 40 % Power Savings / Energy Conservation
  • Airflow range
    • 2.5 SCFM to 44.0 SCFM
    • 4.0 Nm3/h to 72.0 Nm3/h
  • 16:1 system turn down
    • Organic loading optimization driven
    • OxyProcess compatible design
Oxy Process

OxyProcess Design

  • Predictable effluent, TN, TP
    • BNR for low NPDES permits
    • OxyLift, OxyStrip, Dual-Air-Control products
  • 20% - 40% Energy Reduction
    • Separate aeration from mixing energy
    • Infinite recycle provides increased MLSSR
  • Load Oriented Oxygen Demand Supply
    • DO (Dissolved Oxygen) Meter Control
    • ORP (Oxidation Reduction Potential) Meter Control
  • Control Scheme & SCADA Monitoring
    • Plant wide SCADA systems
    • LAN for Ethernet communication
  • Redundancy allows for reduced capital cost
    • Anoxic and Anaerobic basins not required
Oxy Process

OxyPod

  • Lagoon Aeration
    • Oxidation for BOD removal, NH3 – Nitrification
    • Mixing
  • Deployment Method
    • Floating Pontoons for variable water levels
    • Self-weighted drop in & retrievable rack system
  • Mixing & Aeration
    • Area of influence up to 50’ [15m]
    • Depth installed 5’ to 30’ [1.6m to 9m]
  • Mechanical plants
    • Replacement of aeration equipment
    • Supplemental aeration system
oxy Pod

BioCube Process

  • Biofilm attached growth systems for BOD and nitrogen removal from wastewater.
  • Fixed film media units design options
    • Single pass
    • Return sludge IFAS systems
  • Retrievable, drop-in FBBR modules
  • Increasing the BOD removal performance / increase biomass (suspended & fixed) by up to 60% by tank volume
oxy tube

OxyDisc Diffusers

  • Retrofit to existing equipment
  • Fixed grid design only
  • Membrane materials: EPDM, or Silicone
  • Continual & automatic condensation purge system
  • Factory pre-assembled, tested, & certified diffuser modules & grid sections available
Oxy Disc

OxyTube Diffusers

  • High efficiency fine Bubble membrane tube diffuser
    • 10% Higher SOTE over entire design airflow range
    • 10% Power Savings / Energy Conservation over conventional 9” disc
  • 2x1m long OxyTube™ diffusers pair = 5 x 9” disc diffusers
  • Reduce lateral air distribution piping and number of diffusers components needed by Factor 3x vs. 9” disc diffusers systems
  • Fixed grid & retrievable fine bubble membrane diffuser system
Oxy Tube

Let us help you with your new project

Contact Us Call Us